MiFab logo

Serving all of the USA, Canada, Australia and the Middle East, MIFAB can provide you with the quality, engineered plumbing and drainage solutions you need. Innovative product designs save the installer time and material cost and provides the owner with higher quality cast stainless steel drains and cleanouts for the same cost as the industry standard nickel bronze. Contact us today to learn more.

Configure Product

Click for specsheet

List Prices

MIFAB Series MI-G-SDH 1-7 sanitary powder epoxy coated inside and outside fabricated 10 gauge steel hydro mechanical grease interceptor with flow rating of 7-50 gpm and grease holding capacity of 14-100 lbs.

Unit shall include: removable baffle assembly and cross bar, internal deep seal trap covered by lid, securing bolt(s), external vented flow control fitting, internal air relief by pass, internal steel cone, flexible draw-off hose and cap, hose clamp, line shutoff valve, and steel powder epoxy coated non skid rectangular gasketed lid(s).
Series
MI-G-SDH Series Semi Automatic 7 to 75 G.P.M. Hydro Mechanical Grease Interceptors with Draw-off Hose
Gallons Per Minute [Flow Rate]
7 GPM [MI-G-SDH-1]
10 GPM [MI-G-SDH-2]
15 GPM [MI-G-SDH-3]
20 GPM [MI-G-SDH-4]
25 GPM [MI-G-SDH-5]
35 GPM [MI-G-SDH-6]
50 GPM [MI-G-SDH-7]
Inlet/Outlet Connection
No Hub (Standard)
Dimension A1
20.25"
23.75"
26.25"
26.75"
30.25"
33.75"
Dimension B2
16.25"
18.25"
21.25"
26.25"
Dimension C3
3.5"
5.5"
Dimension D
11.5"
14"
16.5"
18.5"
8.5"
9.5"
Dimension E
12"
13"
15"
17.5"
22"
24"
Dimension F
2"
3"
No. of Bolts
10
12
14
16
18
Shipping Weight
115.00 lbs.
125.00 lbs.
155.00 lbs.
220.00 lbs.
235.00 lbs.
75.00 lbs.
95.00 lbs.
Optional Variations - Flange
Anchor Flange [Suffix -FL]
Flange and Membrane Clamp [Suffix -FLM]
Optional Variations
Aluminum Lid [Suffix -AL]
Dosing Pump [Suffix -DP]
High Level Alarm [Suffix -HLA]
Add For Cover Shroud [Suffix -MI-CSD]
Tile Recess [Suffix -TL]
1The "A" dimensions represent the largest dimension of the interceptor (lid). Since the lid overhangs the body by 1/2" on all sides, deduct 1" from the stated dimensions in the charts to determine the actual body length.2The "B" dimensions represent the largest dimension of the interceptor (lid). Since the lid overhangs the body by 1/2" on all sides, deduct 1" from the stated dimensions in the charts to determine the actual body width.3The "C" dimension 15 from the center of the inlet/outlet (invert) to the top of the interceptor. Inlet & outlet "C" dimensions are always the same.
MIFAB, Inc.
1321 West 119th Street Chicago, IL 60643
Toll Free: 800.465.2736
Tel: 773.341.3030
Fax: 773.341.3047
E-mail: sales@mifab.com