MiFab logo

Serving all of the USA, Canada, Australia and the Middle East, MIFAB can provide you with the quality, engineered plumbing and drainage solutions you need. Innovative product designs save the installer time and material cost and provides the owner with higher quality cast stainless steel drains and cleanouts for the same cost as the industry standard nickel bronze. Contact us today to learn more.

Oil Interceptors
Results Per Page  
Returned 10 Results
  • Click for specsheet

    Click for downloads

    List Prices

     

    MIFAB Series MI-O sanitary powder epoxy coated inside and outside fabricated 10 gauge steel oil interceptor. Unit to include: sediment bucket with perforated baffle near inlet, deep seal trap covered by lid, sewer gas stopper, securing bolt(s), removable baffle assembly and cross bar, stainless steel calibrated orifice plate, internal air relief by-pass, adjustable automatic draw-off assembly, double vent connection on each side, and steel powder epoxy coated non skid rectangular lid.

  • Click for specsheet

    Click for downloads

    List Prices

     

    MIFAB Series MI-O-HU sanitary powder epoxy coated inside and outside fabricated 10 gauge Steel oil interceptor. Unit to include: sediment bucket with perforated baffle near inlet, deep seal trap covered by lid, sewer gas stopper, securing bolt(s), removable baffle assembly and cross bar, stainless Steel calibrated orifice plate, internal air relief by-pass, adjustable automatic draw-off assembly, double vent connections on each side, and Steel powder epoxy coated non skid rectangular lid(s). Unit comes complete with integral holding tank for additional waste oil storage.

  • Click for specsheet

    Click for downloads

    List Prices

     

    MIFAB Series MI-OS 1-4 sanitary powder epoxy coated inside and outside fabricated 10 gauge Steel oil/sediment interceptor with sludge capacity of 12-200 lbs. Interceptor complete with ANSI rated "Special Duty" ductile iron grate(s) with load rating over 10.000 lbs., removable sediment bucket and mud pan, deep seal trap with integral sewer gas stopper, internal vent system, cleanout plug and side outlet.

  • Click for specsheet

    Click for downloads

    List Prices

     

    MIFAB Series MI-HAIR lacquered cast iron hair and solids interceptor with internal stainless Steel perforated sediment bucket removable from bottom. Interceptor complete with 1-1/2" slip joint elbow inlet, 1-1/2" F.I.P. side outlet, and gasketed cleanout plug.

  • Click for specsheet

    Click for downloads

    List Prices

     

    MIFAB Series MI-HEL helicopter port fuel interceptor constructed from high strength 1/4" (6) plate steel, ASTM-A242, outlet vent connection, internal vent connection, gasketed access covers fastened with stainless steel bolts, 2" (51) fuel drain connection, 1" (25) fresh water supply connection with gate valve, back flow preventer, automatic water level float valve, external sight glass water level indicator with drain cocks, 2" (51) interceptor drain plugs, channel support rails, and body corner lifting lugs.

    Interceptor shall be coated with Neutra-Rust on the inside and a Class A rated and approved fire retardant intumescent coating.

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification: MIFAB Series MI-SAND/OIL____ sanitary powder epoxy coated inside and outside fabricated 10 gauge steelsand and oil interceptor with a holding capacity of - see chart below. Interceptor complete with gasketed non-skid powder epoxycoated lid, removable sediment bucket with perforated baffle beside inlet, deep seal trap with integral sewer gas stopper, two 2”vent connections, adjustable oil draw off assembly and no hub inlet/outlet.

    Function: Used in service areas to receive wastewater with sand and oil contaminants. Sediment bucket with perforated baffledesigned to capture debris and prevent drain line clogging. Integral sewer gas stopper will prevent harmful gases from enteringvia the outlet. Electrostatically applied powder epoxy coating ensures extra long life.

  • Click for specsheet

    Click for downloads

    List Prices

     

    MIFAB Series MI-FISH-1-12 sanitary powder epoxy coated inside and outside fabricated 10 gauge steel fish scale interceptor.

    Unit shall include: Sediment bucket with perforated baffle near inlet (3/8" (10) holes), primary removable straining baffle (1/2" (13) thick with 1/4" (6) holes), secondary removable straining baffle (1/2" (13) thick with 1/8" (3) holes), securing bolt(s), removable cross bar, stainless steel calibrated orifice plate, and steel powder epoxy coated non skid rectangular gasketed lid(s).

  • Click for specsheet

    Click for downloads

    List Prices

     

    MIFAB's electronic oil interceptor monitors the oil level within the interceptor. A control panel built into a standard electrical box consists of a multi-level LED display that alerts the operator to the current oil level. A green light on the control panel indicates normal operating conditions. At 50% oil storage capacity, the green light will change to yellow. At 75% oil storage capacity, the yellow light changes to red, the alarm will sound, and the inlet will be closed by a motorized valve. The closed inlet prevents additional oil from entering the interceptor and from discharging into the piping system. The operator must remove the lid of the interceptor and remove the accumulated oil and clean off the oil sensing probe to ensure that the motorized valve opens and regular operation can resume. A back-up battery ensures continued operation during short power failures and closes for safety during extended failures. The control panel and internal controls are pre-wired by MIFAB. 115 volt main to 24 volt transformer and low voltage wiring from the control panel to probe inside of the interceptor to be provided by others.

  • Click for specsheet

    Click for downloads

    List Prices

     

    MIFAB's electronic oil interceptor monitors the oil level within the interceptor. A control panel built into a standard electrical box consists of a multi-level LED display that alerts the operator to the current oil level. A green light on the control panel indicates normal operating conditions. At 50% oil storage capacity, the green light will change to yellow. At 75% oil storage capacity, the yellow light changes to red, the alarm will sound, and the inlet will be closed by a motorized valve. The closed inlet prevents additional oil from entering the interceptor and from discharging into the piping system. The operator must remove the lid of the interceptor and remove the accumulated oil and clean off the oil sensing probe to ensure that the motorized valve opens and regular operation can resume. A back-up battery ensures continued operation during short power failures and closes for safety during extended failures. The control panel and internal controls are pre-wired by MIFAB. 115 volt main to 24 volt transformer and low voltage wiring from the control panel to probe inside of the interceptor to be provided by others.

Returned 10 Results
Downloads
MIFAB, Inc.
1321 West 119th Street Chicago, IL 60643
Toll Free: 800.465.2736
Tel: 773.341.3030
Fax: 773.341.3047
E-mail: sales@mifab.com