MiFab logo

Serving all of the USA, Canada, Australia and the Middle East, MIFAB can provide you with the quality, engineered plumbing and drainage solutions you need. Innovative product designs save the installer time and material cost and provides the owner with higher quality cast stainless steel drains and cleanouts for the same cost as the industry standard nickel bronze. Contact us today to learn more.

All Categories  > Interceptors  > Lil-O - Lil Max® 10 to 50 GPM HDPE Oil Interceptors
Lil-O - Lil Max® 10 to 50 GPM HDPE Oil Interceptors


Lil-O – Lil Max® 10 to 50 GPM HDPE Grease Interceptors



Click for specsheet

Click for downloads

List Prices

Specification: MIFAB® Series Lil-(specify size)-O HDPE injection molded oil interceptor with flow rating of ____ (indicate) and oil storage holding capacity of _____ (indicate). Unit shall include: sediment bucket (1/4" diameter holes) with perforated baffle (3/8" x 1 1/4" slots) near inlet, deep seal trap covered by lid, sewer gas stopper, securing latches, stainless steel calibrated orifice plate, internal air relief by-pass, adjustable automatic draw-off assembly, double vent connection on each side, and HDPE injection molded, non skid, rectangular gasketed lid(s).
Function: Oil interceptors are required anywhere oil and sand may be introduced to the public sewer system in applications such as: repair garages, oil change stations, car wash facilities, parking garages, parking lots, hydraulic elevator pits and facilities where oil and flammable liquid waste are produced as a result of manufacturing, storage, maintenance, repair or testing processes. The interceptor collects the oil before it is drained to an adjacent storage tank through an adjustable draw off system. Sediment and debris are collected inside of the internal sediment bucket. Regular maintenance is required to keep the interceptor functioning. Interceptor may be installed on the ground, semi recessed or flush with the floor. Sewer gas stopper prevents foul odors from entering the facility through the interceptor. Simple latch design permits fast and easy removal of the lid for cleaning and maintenance. HDPE injection molded body and lid are covered by a limited lifetime warranty. All Lil Max interceptors can withstand a temperature of up to and including 180 degrees Fahrenheit.

Previously known as: MI-O-PL

No. of Lids

Item Name


MIFAB Design
Maintenance & General Considerations
Fixture Unit Sizing Method

Disposition of Intercepted Materials
Grease Interceptors
Gallons Per Minute [Flow Rate]

Dimensional Drawing
File Not Found
Dimension F
Dimension E
Dimension D
Dimension C

No. of Bolts

Dimension B
1321 West 119th Street Chicago, IL 60643
Toll Free: 800.465.2736
Tel: 773.341.3030
Fax: 773.341.3047
E-mail: sales@mifab.com